• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

5 Tips For Car Keys Repairs

Modern car keys are quite complicated, and as such they require expert assistance to repair them if something goes wrong. This article will give you five tips to ensure your car keys are in good working order.

In many instances, key fobs and remote key fob repair controls can be repaired by simply replacing the battery. In certain cases it is necessary to reprogramme the device. Consult your owner’s manual or a professional for more specific instructions.

Battery Replacement

Modern cars are equipped with remote key fobs that include keyless entry and remote car key repair start features, in addition to traditional keys made of metal. These keys are powered by small batteries that eventually die and need to be replaced. Fortunately this process is simple and can be handled by any local auto accessory shop that has the proper battery type for your vehicle model.

First, consult the owner's manual of your vehicle to find out the type of battery used in your key fob. Once you know what type of battery is on the key fob, head to an auto parts store close to you and buy the replacement. Oftentimes, you can find the same battery at a discount or even free with a special promotion.

Once you have the new battery in your possession you can simply open your key fob and remove the circuit board by pulling away two seams using a flat-head screwdriver or your fingernail (if you're careful not to force anything). Next you need to locate the battery compartment and it should be easy to identify - it will be either installed or have a plus and plus sign embossed on it. Carefully insert the new battery, making sure it is oriented correctly based on the way the old one was.

Replace the circuit board after the battery has been installed. Snap the two halves back together. Once it is reassembled, test the buttons to ensure that everything works as intended. The ID of the key fob will not be affected in the event that the battery is changed, so the key fob should not require reprogramming following the repair. This is good news for drivers looking to save money by not having to go to a locksmith or dealer.

Ignition Cylinder Replacement

Modern key ignition systems for cars require an exact sequence of movements before the engine can start. If something disrupts the process, such as a broken key cylinder, it can cause your car to not start without power. It is possible to replace the key cylinder, however it's not an easy process. The ignition is an intricate, one-key system. It requires specialized tools and precise lubrication.

First, check whether the ignition is turning in the accessory position, and also if the key is inserted correctly. This will allow you to identify the issue and provide an answer. If you can't get the cylinder rotating in any position it is recommended to consult your owner's manual or consult a professional locksmith to assist with the ignition repair.

If the cylinder rotates in the accessory position, you can use a screwdriver to depress the small anti-rotation button at the base of the cylinder. Then, you can rotate the cylinder until its slot line and tabs are up, then slide it out of its casing. If the cylinder won't turn at all, or it's stuck in a rut, you might have to tap it with a hammer or drill it. Be cautious as drilling or rapping can damage the steering wheel.

Once the old cylinder is out and the new ignition cylinder will be installed in its place. The next step is to code the cylinder to ensure that it is in line with the key both in terms of sequence and orientation. You'll also need to remove the tumblers from cylinder and inspect them. If any of the tumblers appear worn out, you'll need to replace them.

After replacing the cylinder you'll need to attach the steering wheel and dashboard covers in the correct order. Be sure to carefully reattach the panels without disturbing the wiring, as it's very easy to loosen the wires and cause disruption to important electronic components. Reconnecting the negative battery cable is also crucial. Test your new ignition.

Key Programming

Modern car key immobiliser repair keys include an electronic chip that communicates with the vehicle. To allow the key to start the engine, the chip and car need to "know each one another".

A locksmith with experience in a wide range of vehicles can reprogram your new key to your car quickly. They can also help if the lock on the car key has been damaged.

The majority of car locksmiths will tell you that the process can take less than a minute when you follow the steps correctly. It could take longer for OBD2 programming or EEPROM programming, since these procedures require your locksmith to extract specific modules from the car (security components) to determine the correct passcode as well as stored key data. This type of procedure should be left to professionals with extensive knowledge of circuit boards as well as electronic components, which reduces the chance of data corruption.

People often forget their car keys when they get home, or put them in the vehicle's trunk after loading groceries into the back seat. In these situations, it's not uncommon to be stranded at the side of the highway without a way to your home or where you want to go. If you have a spare car, your locksmith can program it into your car so you can return to your car.

The lock can be compromised or the key may stop working because of normal wear and wear and tear. If the teeth on your car key no longer fit into the lock, you need to think about replacing your key.

A lot of people try to reprogram their car keys themselves however it is recommended that you have a professional do this work for you instead. These DIY methods could corrupt the information on your car keys and cause it to malfunction or worse, damage to your security system. A professional is less likely to make a mistake which could cost you thousands of dollars in the future.

Broken Key Removal

If your car key is broken inside of the ignition cylinder it is necessary to remove the broken piece. You will not be able to drive your vehicle until the key is removed, and it is recommended to contact an expert for this job since there is a possibility of damaging the ignition through incorrect use of lubricants or extraction tools. If you want to fix your car keys that have broken at home there are a few options that may aid.

A pair of needle-nosed, pliers with extra long tips can be used to grasp the key end that is stuck in the ignition. You can also improve the pliers by coating the business end of them with an adhesive substance like super glue, melted tallow, or putty. After this is done, the pliers will be able grasp the key piece and pull it straight out of the cylinder.

A set of thin, stiff wire could be a useful tool to slide along the broken car key and pulling it out of the lock. You can use a paperclip for this purpose, but be sure to bend both ends slightly to increase the surface area that can hold the key fragment.

Mini hacksaw blades can be a helpful tool to fix broken keys, however they must be extremely thin and small to fit in the tiny opening of an ignition cylinder. These tools are readily available in hardware stores as well as the auto parts section of a few large retailers.

Spraying a small amount of lubricant into the key hole can also be a good idea, as it could loosen the car key and make it easier to take it out. It is not a good idea to attempt to force out a broken key, as it could cause further damage to the ignition or the key. A car key that is bent or snapped in half could be a risky and difficult task to repair, which is why it's a good idea keep a spare car key in a safe place in all at all times.