• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Lock Replacement - What Are the Different Parts of a Door Lock?

A damaged door lock can make your home an easy target for burglars. Change your locks is an inexpensive method to increase security without making your door unusable.

Many locks come packaged with a cardboard template which you can use to wrap around the edge of your door to ensure that it fits properly. This will prevent you from purchasing the wrong lock.

The Cylinder

The cylinder is the main element of a door's mechanical lock. It has a number of spring-loaded pins which keep the door shut even when there is no key into the hole. When the key is put in, the uneven edge of the knob pulls the pins in the cylinder into their correct place. Once the pins are seated they allow the bolt, also known as the latch to move forward and engage the inside of your door.

The bolt extends out of the cylinder and then into the box, a hole is then drilled into the door frame. The box is designed so that the bolt can't be pulled out easily. A clip spring keeps the bolt retracted when the door is closed. When you turn the handle to close the door, the spindle within the cylinder spins. The slanted end retracts into the frame of the door when the spindle is finished rotating. The bolt rests in the carved-out area of your doorframe and keeps the door shut until you are required to open it again.

A faceplate is a metal plate that attaches to the interior of your door, either side of the deadbolt hole. Its purpose is to safeguard your locking mechanism from damage that could be caused by the repeated insertion and removing of your knob. Installing a new lock? Make sure that the faceplate is aligned with the hole in the door frame. Also, make sure the faceplate is securely fastened both to the plate and the latch bore.

If you're replacing the door lock ensure that the deadbolt fits properly by sliding it into the strike plate's opening. After that you can screw the strikeplate and key of the lock into the hole. Do not tighten too much as this can damage the latch or prevent it from fitting into its groove. You can test your new lock by turning the key until it is locked position. If you find any issues like a squealing deadbolt or an unfastened latch it's recommended to replace the upvc window lock repairs with a brand-new one.

The Faceplate

A faceplate is an oversized flat plate that attaches to the headstock of the lathe to hold the workpiece. The screw thread is inserted into the wood via a series of screw holes. Faceplates can be used to support various shapes however, they are more difficult to utilize than a chuck since they must be placed in a fixed position, balanced, and fixed.

A typical faceplate comes with mounting holes. In this instance three holes are placed at 120 degrees intervals to accept the screws for mounting in FIGURE. 2. These screw holes are manufactured using an interchangeable insert 16, or directly into the faceplate body. A portion between the faceplate is a stepped section which serves as an index to locate a specific position on the blank of the workpiece.

The stepping area has also been designed to be resistant to abrasion to ensure that the fastener doesn't damage the chisel you use to cut it. The body's surface of the faceplate has distinct characteristics from the surrounding area and machining into this region alerts the operator of a possible contact with the fastener and gives the turner time to react.

Screws used to fix to a faceplate should have a tiny amount of free play in the screw hole. There shouldn't be any space left behind the screw once it is tightened onto the glue block, as this could allow the block to move when turning. It is also recommended to use a larger gauge screw since it will sit more securely on the faceplate. The screw should be inserted into the middle of the screwhole to prevent the possibility that a screwhead might come into contact with the workpiece.

The Strike Plate

The strike plate is among the most important parts of your door lock. The strike plate keeps the bolt from sliding when you shut the door. The strike plate helps to reinforce the lock and stops intruders from breaking in by applying force against the jamb and latch.

A strike plate is a thick metal plate that is installed in the doorjamb (the vertical part of the frame) with a hole that allows the deadbolt or latch to traverse through. When the cylinder turns, the bolt shoots through the strike plate into the doorjamb, securing it closed.

There are different kinds of strike plates to choose from depending on the requirements of your. If you require a strikeplate that will fit your lock, the information will list it. The majority of strike plates are identical and will work with standard latches and locks.

Most strike plates come with Ovular screw holes as well as an "C-shaped" piece that acts as a washer. They are commonly used on doors with rounded corners and are available in a variety sizes to fit your door.

For additional security, you can opt for strike plates with no lip and is created specifically for deadbolts. This is a great option for areas where security has to be achieved quickly like stairwells. This is a great choice when you need to protect the equipment or documents in your home.

Another option to improve the security of your door is to install a strike plate for your box, which adds thickness and reinforcement to the strike plate. This makes it more difficult to break in through the latch or deadbolt, and it's often required for commercial doors equipped with a security lock.

If your strike plate isn't aligned with the latch bolt Try spraying it with a high-quality lock lubricant. If this doesn't work you will need to adjust the strike plate by drilling new screw holes and enlarging the hole for the catch. It is best not to make any changes to the strike plate. Repeated and extreme adjustments can cause it to lose effectiveness.

The Deadbolt

A deadbolt is an iron bolt that connects the door to the doorjamb frame. Unlike a spring-latch used in doorknobs that can be loided (jimmied) with credit cards or other tools like latch slips, deadbolts are locked by the use of a key, thumb turn, or electronically (in the case of smart and keyless deadbolts). They provide better protection against forced entry methods such as kick-ins, and are simple to use and require minimal maintenance.

The bolt extends through a hole or socket in the door jamb, which is then reinforced with a strike plate to provide extra security. The bolt should have a minimum of 1 inch of length to make it harder to take the door off. You should also choose a deadbolt that has an ANSI rating, which shows how secure the lock is.

In addition to securing the bolt, the strike plate also helps to hold the cylinder in place. There should be three holes that run along the bolt: one, in the center, connects the facepiece and the cylinder. The other two are to the left and right of the central hole. The screws are inserted into these holes to connect the cylinder and bolt. The screws should come standard with the new deadbolt. Some broken window lock repair locks repair (Click Home) come with covers that snap onto the facepieces. Follow the directions provided by the manufacturer to ensure they are installed correctly.

Choosing the right lock for your home requires taking into consideration your lifestyle and the level of security you require. Single deadbolts with cylinders are the most traditional lock option and are found on a variety of exterior doors. Keyless deadbolts are more secure, but may be more difficult to operate. Smart deadbolts let you lock and unlock the bolt with voice commands or a mobile app.

A professional locksmith can assist you in determining what kind of lock is right for your home and will install or change the lock. Upgrade your front-door lock system to improve the security of your home. You can consider installing a double glazing window locks repairs-cylinder, or reversible deadbolt side of your front door to provide an extra layer of security.