• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to repair patio Door a Bad Patio Door Lock

A safe patio door is essential for home security. If your door becomes difficult to lock, it can be a hassle.

A lock that is not working can be caused by misalignment or even simple wear and tear. Lubricating the lock or adjusting its position may help restore its function. If these solutions aren't working, you can replace both the mortise as well as the handle.

Clean and Lubricate

Over time, dirt, dust and grime can make it difficult to open and close a door lock. Regular cleaning and lubrication could aid in preventing your security device from becoming stiff or stuck. This will save you money on repair costs and will extend the lifespan of your door.

The first step in the process is to clean your lock's cylinder. To do this, you'll need spray cans of penetrating oil, such as WD-40. Spray a small amount of oil into the keyhole, and then turn the key to spread it. Avoid using household solvents or other oils that could damage your locks, and make sure to spray a bit on the key itself.

When your lock's cylinder is clean and lubricated, it's time to apply. You can use a dry lubricant such as graphite powder or sprays of silicone. Graphite powder is long-lasting and doesn't attract dust as liquid lubricants, so it's a great choice for lubricating locks that stick. Silicone sprays are able to be able to withstand temperatures that are below freezing and are resistant to water. However, they may require several coats to be efficient.

You can also use sprays for de-icing that is made for colder weather and will lift frost and ice off the lock mechanism. This will allow you to unlock your lock, and then lock it more easily.

How often you need to lubricate your locks will depend on environmental factors. The location of your door can affect its performance. A location that is near the ocean can expose it to salty air, which could cause corrosion. The general rule of thumb is to oil your locks twice per year, or more frequently if you live in an area that experiences extreme weather conditions. Lubricating your wood patio door repair door locks can help save money on repairs, and ensure that they continue to work properly for many years.

Reposition the Lock Cylinder

If your patio door lock isn't functioning correctly, it could indicate that one or more components are damaged or misaligned. Regular inspection and timely repair of a faulty patio door glass repair near me door lock can prevent further damage and ensure that your doors are safe. You can fix a patio door that is locked or unlocked by tightening loose screws, altering the lock mechanism, or replacing the lock cylinder.

Begin by inspecting the exterior and inside of the lock for indications of damage or misalignment. The majority of patio door locks expand and contract in warm or cold weather, and may shift slightly over time. This slight movement could cause the locking mechanism to be misaligned and cause problems when opening or closing the door.

Then, check the lock cylinder for obstructions within the keyway hole. A corroded or obstructed lock cylinder may be difficult to open, and could cause damage to the latch springs, cam, or lock pins. If the cylinder isn't easy to insert, you might be able of removing any obstructions using a pair of tweezers, or a picklock. If the problem persists then you'll need to take the cylinder out and disassemble it to locate the cause of the obstruction.

If the lock cylinder hasn't been screwed into the body of the lock, you can loosen it by uncrewing a flat screw inside the cylinder's faceplate. This screw will allow you rotate the cylinder, and it could also help restore the alignment.

Look for an elongated tab that moves along with the key. It's usually located at the end. This little clip, called a "release tab" is what keeps the cylinder from sliding into the lock body. This tab can be removed using a standard key to allow the cylinder to be removed, then returned.

If the cylinder of your lock is stuck it is possible to restore alignment by rotating the cylinder until the latch bolt engages the strike plate. The knob or handle can then be pushed, and withdrawn. After you have restored the proper alignment, you can reassemble the lock and test it for functionality. If your patio door lock still isn't working it's likely that another component like the latch spring or latch requires replacement.

Tighten the Screws

Over time, the use of regular temperatures, cold and hot weather, dirt, and dust can take their toll on patio door locks. Unless properly cared for, these delicate parts can get worn out and cause your door to fail to lock properly. Most lock issues can be solved with just a few steps.

The first thing you need to do is clean the lock mechanism. Make use of a damp cloth to clean any dirt or dust that may be present, and dry the components thoroughly. After cleaning, a small amount silicone-based lubricant can help keep moving parts running smoothly and efficiently. Avoid lubricants with oil bases, however they can draw dust and dirt that can lead to further issues.

If your patio door is equipped with a security footlock, make sure that the footlock is aligned correctly with the strike plate. Most of the time, this will require you to adjust the screws that secure your foot lock to the frame of the patio door. Remove the screw using a Robertson screwdriver, and gently pry up or down to adjust the foot lock if needed. After the adjustment is completed you can tighten the screw.

The most common problem when it comes to repairing patio doors patio door handles is misalignment of the strike plate and latch. This could be caused by wear and tear or the latch may be positioned lower or higher than it should be.

Begin by removing the handle, and then locate the bolts or screws that secure it. Make sure to keep track of them as you will need them when installing the new handle. Next, remove the old spindle, then slide the new spindle into position on the inside of the door, ensuring that it is in alignment with the holes in the interior and exterior handles. Once the new spindle is in place then reinstall the handles for both exterior and interior, making sure that they are in alignment with the screws or bolts that secure them.

Close and secure the patio door after you have made any necessary adjustments. If the door is properly aligned, it should be able to open and shut without needing any additional force. If you're still having trouble, you might need to reposition the latch or strike plate, or the lock cylinder could be damaged and must be replaced.

Replace the Latch

If your patio door locks still don't work, it may be time to replace the latch. Installing a new lock is a moderately easy home improvement project that a majority of homeowners can tackle by themselves. Begin by sliding glass patio door repair the patio door lock repairs doors completely out and unscrewing your existing lock on the inside of the door. Study the existing lock to determine the type of lock you'll require.

Before installing the new latch, loosen the screws that hold the strike plate. This is the part of the lock that is positioned on the outside of the door's frame. Adjust it horizontally or in an upward direction so that it is aligned with the latch hole. After you've repositioned your strike plate, screw it back into its place and tighten the screws.

After all the parts of your patio door are relocated or replaced, reassemble and secure them as instructed by the manufacturer. When you're done, test the latch to make sure that it is in place and fits the latch's hasp when the door is closed. If it does, your patio door lock is functioning just as it should and is can provide you with the security and privacy you've come to expect from your home's doors.

As with other parts of your home your patio doors also need to be properly aligned for they to function effectively. Over time, heat, cold, dirt, and debris can cause hinges and the frame of the door to shift. If these components are not aligned it's similar to trying to fit keys into the wrong hole for a key: It just doesn't work. By following these simple steps, you can fix the issue that may have seemed unfixable. Give yourself a pat on the back for taking on the task and reclaiming the patio door's closed position! We'll bet you won't have any more trouble opening or closing the door from now on out. Best of luck! We're here to help if you have any questions or concerns.