• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an auto locksmith or Subaru dealer, depending on the age of your Subaru is. This is done through the connection of a computer programming machine to your vehicle.

To program your Subaru begin by opening the driver's door using the door button control, and then close it. You will hear a chime on the instrument panel, and the dome lights will flash.

Step 1: Locate the circuit board on your transmitter

There are a variety of ways to program your key fob. First, you should be aware of the type of key fob you have. You can determine this by studying the shape of your key fob or by listening to the car for a chime.

Once you have the necessary information, you can begin the process of programming your key fob from home. To do this, you will need a metal key and a screwdriver that has a flathead. You can open the key fob by twisting it. Then push the metal key in and release the battery from the small tabs that secure it. Replace the battery with a new one, and then put the key fob case back together.

Step 2 Step 2: Unscrew the Key Fob Case

The battery should be replaced. This is a good idea because it can revive key fobs that have stopped working any more. However, there are situations in which the buttons inside the key fob could be broken. If you are able to see that the button's contacts made of metal have become loose then you can try applying solder back to them to make them work again.

Before you start the process, make sure your vehicle's doors are closed and your ignition is off. You can do this by closing your driver's side door and pressing your door button ten times in quick intervals. You'll then hear the instrument panel chime, and your dome light will flash. This means you're in a position to proceed.

Step 3: Insert the fob for the key into the ignition

A lot of articles on the internet will show you how much to replace subaru key to program your new or Replacement Subaru Key Subaru keyfob at home. However, most of them don't offer specific instructions. A professional auto dealer or locksmith in Fort Bliss is the best option to reprogram an electronic car key.

Sit in the driver's seat of your Subaru with the engine off and the doors closed. Use the door button control and use it to unlock all doors. Close and open the driver's doors two more times. Inject and remove the ignition key (don't turn it) 10 times in 40 seconds. The system should sound chirps to confirm that the settings have changed.

Step 4: Turn the ignition On

It is essential to realize that this method of programming a key fob only is effective if you have a working key. If you don't then a dealer or auto-locksmith will be required to program the key for your Subaru Fort Bliss.

After your key has been programmed you should be able start your car within five seconds. To begin, ensure that all doors are shut and the engine is off. Sit in the driver's seat and open all doors using the button on the door. Place the key in the ignition and turn it to its first position. The electrical systems will be activated, however, the engine will remain off. Repeat this procedure 10 times.

Step 5: Unlock the Driver's Door

Subaru provides a variety of premium automobiles equipped with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. These devices are sometimes not functioning.

To resolve the issue, you should contact an auto locksmith or dealer. This will solve the issue and ensure that your vehicle is secure.

You must first open and close the driver's door. Then, you need to place the ignition key and turn it to the first position. Then, you can turn it back to the off position. Repeat this 10 times in the row as fast as you can. After the tenth rep, you should hear a chime.

Step 6: Press the Lock/Unlock Button on the Driver's Door

The procedure for replacing subaru key a battery in the Subaru remote key fob is very simple. The first step is to open the exterior fob casing. Then then, use the flathead screwdriver open the interior case and take out the old battery.

After removing the battery then replace it with a new one. Close the case. Assume a seat in the driver's chair and unlock all doors using the door-button control. Place the key in ignition and turn it to ensure that the electrical system is on, but the engine is off. Repeat this 10 times until you hear a chime sound on the instrument panel. This will put the system in programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

For some owners, the annoyance sound that is heard when locking and unlocking the subaru car key key fob from outside can become distracting. In some cases, you can disable the chirp by opening and closing all doors by double-clicking on the lock button on the key fob.

Close all doors, including the fuel-filler lid and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a sound when this is achieved. The chime signifies that the fuel-filler lid and door lid are locked. The setting can also be changed so that the doors and lids for the fuel-filler are locked automatically, without pressing the request switch.

Step 8 Step 8: Enter the 8-Digit Transmitter Number.

Remember the first 8 digits in your head. Now, climb into the driver's seat, shut the doors and turn the key into the first position. After 10 turns, your instrument panel should begin to sound once.

The circuit board that controls the transmitter is located in the key fob's case. The circuit board should have one or two 8-digit numbers. Follow the steps in the guide to register the code. This process may require visiting the dealer for older models.