• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to improve the security of your home without sacrificing aesthetics, go for sash lock door handles. They are used in conjunction with a mortice latch or sash lock. They can be combined with a night latch to add locking for doors inside.

These handles are a combination of two levers placed on backplate. They can be used with three or five-lever mortice locks. They can also be combined with an elongated latch.

Lever Lock Handles

There are many types of lever handles that can be matched to any style. Rustic lever handles work well with ranch or farmhouse style decor and are also popular in modern homes. Classic lever handles are round or spherical, and easy to hold. They are simple, affordable and fit in with any home decor. Select polished or satin nickel chrome handles to create a sophisticated look. These finishes are easy to clean and are durable. Antique bronze and polished brass are also alternatives. Many handles have a decorative design, like small amber worm eyes or long-horned crystals. Some feature an elongated pin or star molded into the bottom of the lever.

To replace window sashes the lever lock door handles first ensure you have the correct screwdriver or other tool to disassemble them. Depending on the design and model you may have to make use of an awl or nail to remove the lever handle. Some lever handles feature a small notch or hole on one side of the base which can be used to pry it open.

Once you have the correct tool Follow the instructions of the manufacturer to remove the handles you have already installed. You'll need to verify the size of the spindle of your new lever handle. Doors that have been morticed (cut into the door) for previous latches or locks, and must be fitted to a specific spindle size. Most lever handle manufacturers have a standardized door spindle size for handle.

If you are replacing the handle of a sash lock the old handle should be removed and the tubular latch bolt, which sits within the door, needs to be removed from the strike plate inside the door frame. The latch bolt will need to be put through a hole in the frame of the door and connected to the strike plate.

It is important to remember that when installing a new lever handle all handles that are compliant with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user shouldn't be required to grip tightly or turn their wrists. To meet ADA compliance standards, the lever door handle should not be operated using only the thumb and finger, or even the entire hand.

Sash Lock Handles

The primary purpose of sash lock door handles is to pull the moving sashes together in a tight seal. This helps to keep the temperature of the house and stops drafts. They are perfect for doors without the need for a keyed lock.

Mortice sashlocks are locks that incorporate deadbolt and latch in one case. They are installed into the door's materials. They are used in conjunction with door handles and are available in a variety of options.

Lever lock handle is a lever on a backplate cut out beneath it, which permits a key to be inserted to open the mortice sash lock. It's most commonly used for non-locking doors, such as dining rooms and living rooms, but can be paired with a tubular lock on a more secure internal door.

They are designed to keep the sash together for multiple times and come with a hook that fits in the keeper. These are available in various styles and designs that fit different types of windows like sliding sash window locks or hinged casement windows. Some are made from cast aluminium while others are brass or wrought iron. These are available in different finishes to match the other elements of door furniture, like escutcheons to secure the keyhole.

The 3 lever sash locks are only suitable for use on doors with internal doors. They do not provide the security required by insurance companies. They also have a lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.

A door sash lock with 5 levers is a much more secure option for exterior doors because it provides greater levels of resistance to forced entry and is more difficult to pick or bypass. These locks are a brand new design that has been tested and certified to ensure compliance with strict building, fire and disability regulations.

To replace a handle on a wooden sash windows-lock, remove the old fastener from both ends by taking off the screws. Be sure to have a screwdriver on hand and carefully separate the pieces so that you don't damage them. Mark the screw holes with a pencil to place the new fastener in the correct position when you are ready to install it. Clear away any dust or flickers of paint and then screw the new fastener in. Test the handle to ensure it functions properly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is a latch mechanism which sits inside a door and is operated by turning the handle. It is designed to shut a door but does not lock it as mortice locks. They are most commonly used for doors with internal doors, where locking is not necessary. They can be equipped with lever handles or knobs.

There are a variety of sizes of tubular latch available. The sizes range from the economy to the high-end architectural. The size you select will depend on the use of the door as well as whether you require a lock function. For instance bathrooms may require the ability to turn a thumbturn and release in case in an emergency, therefore you'll need an latch that can be locked.

Choosing the right latch also depends on the backset dimension of your door. This is the distance between the edge of your door and the center of the hole that is used for the door handle rose/knob and you should choose a latch with an identical backset measurement. This will ensure your handle/door knobs can operate the latch smoothly.

If you are installing a knob or lever that has a spring or not spring, it is essential to choose a heavy-duty tubular latch. It must have an elongated follower that is double-sprung. This will ensure a smooth latch operation and stop it from becoming sluggish or unresponsive after prolonged use.

The next step is to put the latch on the door. The first step is to make sure that the latch is level with the top of the door frame or casing. Then mark the location of the latch and drill holes. Countersink drill bits help create the correct recess that allows it to fit comfortably.

Once the latch is installed, you can screw it into the door. Before installing your locks or handles, it is important to make sure that the latch is working properly. To check this you need to open and close the door a few times. If it's not functioning properly try lubricating your door with WD40. Then re-try it. If you continue to experience problems, it may be necessary to speak with a locksmith or a professional installer.

Keyhole Handles

Keyhole handles work with a tubular latch that is installed inside the door. The latch is used to open and shut the door. The handle is able to engage the latch when it is pushed down and then releases it when pulled up. These types of handles are most often used on doors with internal openings such as living rooms or dining room doors but can also be used on front doors if they are paired with a nightlatch.

Door knobs are a modern type of handle that combines a sprung lever/handle on a square or round fixing rose with a matching thumb turn or escutcheon. They come in a wide range of finishes and styles to fit different doors around the home. They can be utilized with Euro cylinder locks or multipoint locking systems that provide additional security to the door. This is accomplished by putting several points of locking along the door's height. It requires door handles that are compatible with the correct lock centre dimension to fit the barrel of the cylinder.

Keyhole escutcheons are an escutcheon that covers the door's existing key hole to conceal it from view and provide an elegant finish to the handle. They come in both the screw or pop on design and come in a variety of finishes to match the door handle. Alternatively, a recessed escutcheon can be fitted to the edge of the door to hide the keyhole and provide a more modern look.

The majority of the handles mentioned above are designed to work with either a mortice or sash lock mechanism, however some are compatible with Euro cylinder locks too. These are used on uPVC doors and require compatible door handles that have a Euro cylinder cutout and suitable screw holes within the backplate to accommodate the euro cylinder. These handles might also require an escutcheon for Euro-cylinders, or a standard escutcheon depending on the purpose for which they are used.

If you decide to use mortice lock or a sash lock, or a tubular latch for your door, it's important to be aware of the different characteristics of each and the requirements they must meet for compatibility with the other components of your upvc double glazed sash windows door system. It is important to take into consideration the door's thickness, the door hinges and frame reinforcements, the dimensions of the backplate for the handle, the lock's central dimensions and the screw centers on the cylinder.